Galaxy Tajmac

K’MX 413 is dedicated to run small parts from Ø 2–16 mm (over Ø 13 mm a preparation of bars is necessary in standard, as option can be used full Ø 16 mm bar without preparation). Designed as an all package, the K’MX 413 is standardized and ready to produce. Sub spindle, powered tools are included in the basic machine as well as the bar loader. The light kinematic and FANUC 0i controller provides an easy and quick programming reducing the setup time. With 2 electro spindles, 3 powered tools, C-axis, and up to 12 fixed tools, the K’MX 413 is also able to run sophisticated parts. With this machine, GALAXY-TAJMAC Machinery wants to offer an economical, reliable and easy solution.

Sliding headstock (Swiss type) automatic lathe K'MX 432, 632 is designed for productive machining of parts from the bars of maximum diameter 32 mm. As the spindle bore diameter is 37 mm, there is no modification of the end of the bar for bar feeder collet needed. Machine is equipped in standard with two electro spindles with maximum speed 10.000 rpm each and with rotary guide bush synchronized by pulleys and belts with main spindle. Four linear axes (X1, Y1, Z1, aZ2); two rotary axes (C1, C2) enable to machine with high productivity the simple as well as complex parts. K‘MX 432, 632 is the ideal solution to manufacture parts with high productivity.

Sliding headstock (Swiss type) automatic lathe MANURHIN K’MX 532 TREND is designed for productive machining of parts from the bars of maximal diameter 32 mm. As the spindle bore diameter is 37 mm, there is no modification of the end of the bar for bar feeder collet needed. Machine is equipped in standard with two electro spindles with maximum speed 10.000 rpm each and with rotary guide bush synchronized by pulleys and belts with main spindle. Five linear axes (X1, Y1, Y2, Z1, and Z2) two rotary axes (C1, C2) enable to machine with high productivity the simple as well as complex parts.

Sliding headstock (Swiss type) automatic lathe MANURHIN K’MX 632 DUO is designed for productive machining of parts from the bars of maximal diameter 32 mm. As the spindle bore diameter is 37 mm, there is no modification of the end of the bar for bar feeder collet needed. Machine is equipped in standard with two electro spindles with maximum speed 10.000 rpm each and with rotary guide bush synchronized by pulleys and belts with main spindle. Six linear CNC axes (X1, X2, Y1, Y2, Z1, and Z2) two rotary axes (C1, C2) enable to machine with high productivity the simple as well as complex parts. Big advantage of this model is possibility of parallel turning or milling with two tools in one time.

Sliding headstock (Swiss type) automatic lathe MANURHIN K’MX 732 EVO is designed for productive machining of parts from the bars of maximal diameter 32 mm. As the spindle bore diameter is 37 mm, there is no modification of the end of the bar for bar feeder collet needed. Machine is equipped in standard with two electro spindles with maximum speed 10.000 rpm each and with rotary guide bush synchronized by pulleys and belts with main spindle. Seven linear CNC axes (X1, X2, Y1, Y2, Z1, Z2, and W1) two rotary axes (C1, C2) enable to machine with high productivity the simple as well as complex parts. Construction solution enables of use up to 4 tools at the same time.

Sliding headstock (Swiss type) automatic lathe MANURHIN K’MX 816 CLEVER is designed for productive machining of parts from the bars of maximal diameter 16 or 20mm. Machine is equipped in standard with two electro spindles and with rotary guide bush synchronized by pulleys and belts with main spindle. Eight linear CNC axes and two rotary axes enable to machine with high productivity the simple as well as complex parts. Construction solution enables the use of 4 tools at the same time.

The K’MX SWING 10 AXIS is dedicated to machining complex parts from the bar up to o 32 mm. The SWING 10 AXIS is delivered in two versions – for bars Ø 26 and Ø 32 mm. The main characteristics from K’MX SWING 10 AXIS are: Productivity, up to 23 tools including 14 powered tools, up to 4 tools, working simultaneously with 10 independent axes. An easy and quick tool change with the compatible tool holder cartridge system. A simplified programming with K’MX PLUS software, Ergonomic and easy access with large opening door and a numerical control working under, WINDOWS. K’MX SWING is the ideal solution to manufacture complex parts with high productivity and useful for the operator.